Comments
home » flash components » skins and patterns » mcte v3 3d cube » comments »
MCTE V3 3D Cube pattern
The MCTE V3 3D Cube is a pattern for the MCTE V3 component. We've choosed to create a MovieClip Transition Effect which already have inluded transitions inside but we also want to develop new patterns for it without having to change the main component. That's why we are selling these patterns separately. You purchase once the MCTE V3 and add patterns all the time. It's simple. You can also download trials to see how this component works.....
However, thank you for your suggestion, we're learning all the time...so if you have any other suggestions, please write an e-mail to our support departament. Thank you
posted by jumpeyecomponents on 08-08-07
The MCTE V3 3D Cube is a pattern for the MCTE V3 component. We've choosed to create a MovieClip Transition Effect which already have inluded transitions inside but we also want to develop new patterns for it without having to change the main component. That's why we are selling these patterns separately. You purchase once the MCTE V3 and add patterns all the time. It's simple. You can also download trials to see how this component works.....
However, thank you for your suggestion, we're learning all the time...so if you have any other suggestions, please write an e-mail to our support departament. Thank you
Confusing
Yes, ineed is very confusing..
posted by thirdmotion on 10-08-07
Yes, ineed is very confusing..
confusing...
i ha placed 2 movieclips and i have 1MCTE and 1 MCTE Pattern 3dcube component. i have placed the instance name of the 3dcube pattern in the costumpattern of the MCTE component and configured de instance name ao the costum parameter1 and 2. why this doesn´t work?
posted by yoxi on 21-08-07
i ha placed 2 movieclips and i have 1MCTE and 1 MCTE Pattern 3dcube component. i have placed the instance name of the 3dcube pattern in the costumpattern of the MCTE component and configured de instance name ao the costum parameter1 and 2. why this doesn´t work?
send your files over
yoxi, it seems that you've done everything right but we need to see your files in order to find out why the 3D Cube pattern is not working. Please send your files to our support department and we will help you set your files.
posted by jumpeyecomponents on 24-08-07
yoxi, it seems that you've done everything right but we need to see your files in order to find out why the 3D Cube pattern is not working. Please send your files to our support department and we will help you set your files.
I am not agree :P
i'm lovin' it! .... just drag and drop and that's it. Is there something confusing ? No
posted by slowMotion on 15-10-07
i'm lovin' it! .... just drag and drop and that's it. Is there something confusing ? No
Excellent Component set!!
Intermediate to experienced Flash developers will love this component set.
Please add a user forum to your website - we can all benefit from learning from eachother, giving you feedback, etc.
Thanks!
posted by Jdnet33463 on 24-10-07
Intermediate to experienced Flash developers will love this component set.
Please add a user forum to your website - we can all benefit from learning from eachother, giving you feedback, etc.
Thanks!
about user comments
We've recently added the possibility to our members to discuss about our components on our Knowledge Base items. So if you want to talk about the 3D Cube pattern, you can do it on the MCTE V3 item inside the Knowledge Base. There you can add a question, we will respond to it and then you or any other member can add comments for that item. We want to encourage our customers to share their experience with our components. Thank you for your comment.
posted by jumpeyecomponents on 25-10-07
We've recently added the possibility to our members to discuss about our components on our Knowledge Base items. So if you want to talk about the 3D Cube pattern, you can do it on the MCTE V3 item inside the Knowledge Base. There you can add a question, we will respond to it and then you or any other member can add comments for that item. We want to encourage our customers to share their experience with our components. Thank you for your comment.
Doubts
Good. But before I buy this companent I need to get some things sorted out. These are my requirements.
1. I have four pages to be displayed on the four side of the cube. I need four buttons each of which when clicked should rotate to the corresponding side.
2. My four sides of the cube are actually four pages of my site, so they will need to have buttons and should be clickable.
3. My four pages are of different width.
If these things wont cause a problem, please inform me asap.
posted by manojgregory2000 on 04-02-08
Good. But before I buy this companent I need to get some things sorted out. These are my requirements.
1. I have four pages to be displayed on the four side of the cube. I need four buttons each of which when clicked should rotate to the corresponding side.
2. My four sides of the cube are actually four pages of my site, so they will need to have buttons and should be clickable.
3. My four pages are of different width.
If these things wont cause a problem, please inform me asap.
download the trial version
Please download the trial version component and pattern too so you'll be able to try if it fits to your needs. Try it only with 4 pictures. If you're using the MCTE (with the 3D Cube pattern applied on it) together with Loader Pro V3, your life will be easier.
posted by jumpeyecomponents on 04-02-08
Please download the trial version component and pattern too so you'll be able to try if it fits to your needs. Try it only with 4 pictures. If you're using the MCTE (with the 3D Cube pattern applied on it) together with Loader Pro V3, your life will be easier.
Doubt again
I need four button & on clicking on each button the cube should rotate to respective sides. But i dont need the top & bottom side.
Is it possible with your component. I dont need the trial version
posted by manojgregory2000 on 04-02-08
I need four button & on clicking on each button the cube should rotate to respective sides. But i dont need the top & bottom side.
Is it possible with your component. I dont need the trial version
Confusing without proper documentation
What we really need here is full working tutorial and sample, TxEff style (PDF, FLA and SWF files), MCTE V3 installation and configuration was a breeze, however Those patterns MCTE V3 Cube and MCTE V3 Flip pack are getting really hard to get them work as I want. The Demo3DCube.fla file is throwing a bizarre error and didn't work for me. the included FLA files from MCTE V3 flip pack didn't worked for me either.
posted by superpowter77 on 25-02-08
What we really need here is full working tutorial and sample, TxEff style (PDF, FLA and SWF files), MCTE V3 installation and configuration was a breeze, however Those patterns MCTE V3 Cube and MCTE V3 Flip pack are getting really hard to get them work as I want. The Demo3DCube.fla file is throwing a bizarre error and didn't work for me. the included FLA files from MCTE V3 flip pack didn't worked for me either.
please write to support
If you need any help, file examples or you get errors, please send the files to our support department.
posted by jumpeyecomponents on 26-02-08
If you need any help, file examples or you get errors, please send the files to our support department.
no properties i need to download something extra .. way too confusing. Come one people when you make a component at least have parameters for that specific component.. lear from Flashloaded